Bonjour,
Savez-vous comment peut-on sauvegarder les réglages effectués sur une interface Alesis Trigger I/O ? Pour éviter de les refaire à chaque redémarrage...Merci.
Sauvegarde réglages Alesis Trigger i/o
-
krickgpe
- Place ses micros
- Messages : 78
- kuchnie na wymiar Dąbrowa Górnicza Chorzów Jaworzno
- Inscription : jeu. 12 juil. 2012, 11:53
-
soft
- Conseil des sages
- Messages : 20072
- Inscription : ven. 18 nov. 2005, 23:00
- Localisation : à l'ouest
Re: Sauvegarde réglages Alesis Trigger i/o
si tu sais lire un manuel tu n'auras aucune difficulté à comprendre ça:
If you have made changes to the selected kit (i.e. changed MIDI note numbers, channels), you will notice that the LED next to Kit will begin blinking. This means that there are changes which have not yet been saved. To save these changes, please use the function up/down buttons to return to the Kit Function. This will save the changes you have made to the current kit. Alternatively, if you have made changes to the current kit but do not wish to save them, press function down and value down buttons simultaneously. This will cancel any changes made after the kit was loaded.
Compresi ?
If you have made changes to the selected kit (i.e. changed MIDI note numbers, channels), you will notice that the LED next to Kit will begin blinking. This means that there are changes which have not yet been saved. To save these changes, please use the function up/down buttons to return to the Kit Function. This will save the changes you have made to the current kit. Alternatively, if you have made changes to the current kit but do not wish to save them, press function down and value down buttons simultaneously. This will cancel any changes made after the kit was loaded.
Compresi ?
" the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us"
Re: Sauvegarde réglages Alesis Trigger i/o
Ok, merci à toi et désolé pour ma réponse tardive...